VMWareを新しいバージョンに入れ替えました。
評価ライセンスでしばらく動作確認して問題なければ、購入する予定
米国のサイトからダウンロードしてきましたが、ローカライズされているらしく、メニューもメッセージも全て日本語で表示されますね。
以前の仮想マシン全て引き継がれていました。
以下VMWare Toolsのインストールログです。
インストールに問題は、ありませんでしたがネットワークが止まってしまったので/etc/init.d/network startで起動しました。
$ sudo ./vmware-install.pl
Creating a new VMware Tools installer database using the tar4 format.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin] /usr/local/bin
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/local/sbin]
In which directory do you want to install the library files?
[/usr/local/lib/vmware-tools]
The path "/usr/local/lib/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
In which directory do you want to install the documentation files?
[/usr/local/doc/vmware-tools]
The path "/usr/local/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 6.0.1 build-55017 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command:
"/usr/local/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/local/bin/vmware-config-tools.pl". Do you
want this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Trying to find a suitable vmmemctl module for your running kernel.
None of the pre-built vmmemctl modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmmemctl module
for your system (you need to have a C compiler installed on your system)?
[yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.20-16-generic/build/include]
Extracting the sources of the vmmemctl module.
Building the vmmemctl module.
Using 2.6.x kernel build system.
make: ディレクトリ `/tmp/vmware-config0/vmmemctl-only' に入ります
make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります
CC [M] /tmp/vmware-config0/vmmemctl-only/os.o
SHIPPED /tmp/vmware-config0/vmmemctl-only/vmmemctl1.o
LD [M] /tmp/vmware-config0/vmmemctl-only/vmmemctl.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: could not find /tmp/vmware-config0/vmmemctl-only/.vmmemctl1.o.cmd for /tmp/vmware-config0/vmmemctl-only/vmmemctl1.o
CC /tmp/vmware-config0/vmmemctl-only/vmmemctl.mod.o
LD [M] /tmp/vmware-config0/vmmemctl-only/vmmemctl.ko
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます
cp -f vmmemctl.ko ./../vmmemctl.o
make: ディレクトリ `/tmp/vmware-config0/vmmemctl-only' から出ます
The module loads perfectly in the running kernel.
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmhgfs module.
Building the vmhgfs module.
Using 2.6.x kernel build system.
make: ディレクトリ `/tmp/vmware-config0/vmhgfs-only' に入ります
make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります
CC [M] /tmp/vmware-config0/vmhgfs-only/backdoor.o
CC [M] /tmp/vmware-config0/vmhgfs-only/backdoorGcc32.o
CC [M] /tmp/vmware-config0/vmhgfs-only/bdhandler.o
CC [M] /tmp/vmware-config0/vmhgfs-only/cpName.o
CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLite.o
CC [M] /tmp/vmware-config0/vmhgfs-only/dbllnklst.o
CC [M] /tmp/vmware-config0/vmhgfs-only/dentry.o
CC [M] /tmp/vmware-config0/vmhgfs-only/dir.o
CC [M] /tmp/vmware-config0/vmhgfs-only/eventManager.o
CC [M] /tmp/vmware-config0/vmhgfs-only/file.o
CC [M] /tmp/vmware-config0/vmhgfs-only/filesystem.o
CC [M] /tmp/vmware-config0/vmhgfs-only/fsutil.o
CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsBd.o
CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/vmware-config0/vmhgfs-only/inode.o
CC [M] /tmp/vmware-config0/vmhgfs-only/kernelStubsLinux.o
CC [M] /tmp/vmware-config0/vmhgfs-only/link.o
CC [M] /tmp/vmware-config0/vmhgfs-only/message.o
CC [M] /tmp/vmware-config0/vmhgfs-only/module.o
CC [M] /tmp/vmware-config0/vmhgfs-only/page.o
CC [M] /tmp/vmware-config0/vmhgfs-only/request.o
CC [M] /tmp/vmware-config0/vmhgfs-only/rpcin.o
CC [M] /tmp/vmware-config0/vmhgfs-only/rpcout.o
CC [M] /tmp/vmware-config0/vmhgfs-only/staticEscape.o
CC [M] /tmp/vmware-config0/vmhgfs-only/stubs.o
CC [M] /tmp/vmware-config0/vmhgfs-only/super.o
LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.ko
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます
cp -f vmhgfs.ko ./../vmhgfs.o
make: ディレクトリ `/tmp/vmware-config0/vmhgfs-only' から出ます
The module loads perfectly in the running kernel.
pcnet32 34052 0
Unloading pcnet32 module
Trying to find a suitable vmxnet module for your running kernel.
None of the pre-built vmxnet modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmxnet module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmxnet module.
Building the vmxnet module.
Using 2.6.x kernel build system.
make: ディレクトリ `/tmp/vmware-config0/vmxnet-only' に入ります
make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります
CC [M] /tmp/vmware-config0/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/vmware-config0/vmxnet-only/vmxnet.ko
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます
cp -f vmxnet.ko ./../vmxnet.o
make: ディレクトリ `/tmp/vmware-config0/vmxnet-only' から出ます
The module loads perfectly in the running kernel.
update-initramfs: Generating /boot/initrd.img-2.6.20-16-generic
update-initramfs: Generating /boot/initrd.img-2.6.20-15-generic
Trying to find a suitable vmblock module for your running kernel.
None of the pre-built vmblock modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmblock module
for your system (you need to have a C compiler installed on your system)?
[yes]
Extracting the sources of the vmblock module.
Building the vmblock module.
Using 2.6.x kernel build system.
make: ディレクトリ `/tmp/vmware-config0/vmblock-only' に入ります
make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります
CC [M] /tmp/vmware-config0/vmblock-only/linux/block.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/control.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/dentry.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/file.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/filesystem.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/inode.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/module.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/stubs.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/super.o
LD [M] /tmp/vmware-config0/vmblock-only/vmblock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmblock-only/vmblock.mod.o
LD [M] /tmp/vmware-config0/vmblock-only/vmblock.ko
make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます
cp -f vmblock.ko ./../vmblock.o
make: ディレクトリ `/tmp/vmware-config0/vmblock-only' から出ます
The module loads perfectly in the running kernel.
[EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service
provides a new communication capability with the Host, primarily for
development at the moment. Would you like to enable this feature? [no]
Detected X.org version 7.2.
Please choose one of the following display sizes that X will start with (1 -
15):
[1] "640x480"
[2] "800x600"
[3]< "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x900"
[10] "1400x1050"
[11] "1440x900"
[12] "1680x1050"
[13] "1600x1200"
[14] "1920x1200"
[15] "2364x1773"
Please enter a number between 1 and 15:
[3] 5
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux ubuntuvm10 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/vmware-config0/XF86ConfigLog.7008", Time: Thu Sep 20 23:12:52 2007
(++) Using config file: "/tmp/vmware-config0/XF86Config.7008"
(EE) Failed to load module "void" (module does not exist, 0)
X is running fine with the new config file.
(EE) AIGLX: Screen 0 is not DRI capable
(EE) No Input driver matching `void'
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
Guest filesystem driver: done
Mounting HGFS shares: failed
Guest memory manager: done
Guest vmxnet fast network device: done
Blocking file system: done
DMA setup: done
Guest operating system daemon: done
/etc/init.d/vmware-tools: 1050: vmware-guestd: not found
The configuration of VMware Tools 6.0.1 build-55017 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/local/bin/vmware-toolbox" during an X server session.
To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/networking stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/networking start
To make use of the virtual printer, you will need to restart the CUPS service
Enjoy,
--the VMware team
$
